HR800 - ROUGH & TRIM MOWERS

HR800 - ROUGH & TRIM MOWERS

HR800 - ROUGH & TRIM MOWERS

HR800

Lượt xem: 1974

192" (4.9 m)

1 - 6" (25-152 mm) in 0.5" (12.7 mm) increments

Kubota 74.3 HP (55.4 kW) Turbo Diesel

KEY ATTRIBUTES
REELS AND BLADES
TRACTION, BRAKES AND SPEED
WEIGHT AND DIMENSIONS
Comment

MOWER CUTTING WIDTH	192" (4.9 m)
MOWER HEIGHT OF CUT	1 - 6" (25-152 mm) in 0.5" (12.7 mm) increments
MOWER ENGINE	Kubota 74.3 HP (55.4 kW) Turbo Diesel
CUTTING CAPACITY	21.3 acres/hr at 11 mph (8.62 ha/hr. at 17.7 km/h)
TRANSPORT SPEED	20 mph (32.2 km/h)
FUEL/BATTERY CAPACITY (+RUN TIME)	29.5 gal. (109.8 L)
MOWER WARRANTY	2 Years

TRACTION DRIVE	Hydrostatic closed loop parallel-cross-series SureTrac™ system
DECK DRIVE	Nine individual hydraulic motors with self lubricating integral bearings
HYDRAULIC SYSTEM	20.3 gal. (76.8 L) reservoir with 10 micron remote charge filters and suction screening at tank. Oil cooler in side by side radiator.
SERVICE BRAKES	Dynamic through hydrostatic traction system
PARKING BRAKES	Automatic wet parking brakes integrated into wheel motors
STEERING	Power Steering
MOWING SPEED	11 mph (17.7 km/h)
REVERSE SPEED	6 mph (9.6 km/h)

NUMBER AND SIZE	1 x 72" (1.83 m) front deck; 2 x 66" (1.68 m) wing units
BLADE MATERIAL	MARBAIN® boron alloy steel
DECK LIFT/LOWER	Individual via fingertip operated joysticks
WEIGHT TRANSFER	On demand electrically operated hydraulic weight transfer system
DECK CONSTRUCTION	11 gauge (3 mm) Strenx, high strength steel shell

WEIGHT	4801 lbs. (2178 kg), 5370 lbs. (2436 kg) with cab
LENGTH	147" (3.66 m) front deck down
HEIGHT (ROPS UP)	85" (2.16m)
WHEEL BASE	67.4 (1.71m)
TRANSPORT WIDTH	77" (1.96 m)
WORKING WIDTH	197" (5.00 m)

RELATED PRODUCTS

AR321

72" (182.88 cm)

0.75-3.5" (19-88 mm)

Kubota® 24.8 HP (18.6kW) diesel

SEE DETAIL

HR600

137" (3.5 m)

1 - 4.75" (25 - 121 mm) in 0.25" (6.4 mm) increments

Kubota 65.2 HP (48.6 kW) Turbo Diesel

SEE DETAIL

HR700

168" (4.27 m)

1 - 4.75" (25 - 121 mm) in 0.25" (6.4 mm) increments

Kubota 65.2 HP (48.6 kW) Turbo Diesel

SEE DETAIL

LF570 T4I

100" (2.54 m)

0.375 - 1.125" (9.5 - 28.5 mm), Available high-cut kit raises cutting height to 1.563" (39.7 mm)

SEE DETAIL

LF570

100" (2.54 m)

0.375 - 1.125" (9.5 - 28.5 mm), Available high-cut kit raises cutting height to 1.563" (39.7 mm)

SEE DETAIL

LF550

100" (2.54 m)

0.375 - 0.75" (9.5 - 19 mm), Available high-cut kit raises cutting height to 1.187" (30.2 mm)

SEE DETAIL

SLF530

82" (2.08 mm)

0.30" - 0.70" (7.62 - 177.78 mm), Available high-cut kit raises cutting height to 0.937" (23.8 mm) using low profile, heavy bedknife

SEE DETAIL

PGM22

22" (55.9 cm)

0.062" - 438" (1.6 - 11.11 mm)

4 HP (2.9 kW)

SEE DETAIL

Copyright © PHUONG NAM. Powered by NiNa Co.,Ltd

Online: 4Total Access: 236369